• Probst gets things moving - innovative, efficient and ergonomic

SPEEDY VS-140/200 Vacuum Hand Laying Device

  1. Home
  2. Site Equipment
  3. Vacuum laying
  4. Vacuum Devices
  5. Handheld Devices
  6. SPEEDY VS-140/200 Vacuum Hand Laying Device

SPEEDY VS-140/200 Vacuum Hand Laying Device

Order-Number: 52700011, 52700012, 52700013, 52700014, 42710149, 42710089, 42710126, 42710129, 42710130, 42710131, 42710132, 42710127, 21070141, 42710013, 42710135, 42710136, 42710137, 42710133, 42720347, 42720360, 42720345, 42710032, 42710029, 42710031, 42710030

SPEEDY VS-140/200 Vacuum Hand Laying Device:

working load limit now up to 200 kg

With this new inexpensive hand laying tool all kinds of slabs can be layed quickly and above all, ergonomically.

The powerful single phase powered vacuum turbine also allows the quick and safe handling of very porous material as well as material with exposed aggregat surface.

  • NEW: Can now, when combined with the corresponding suction plate and lifting eye VS-EH safely lift and lay elements weighing up to 200 kg.
  • The working load limit with handles is 140 kg.
  • The construction of the SPEEDY has been reinforced throughout.
  • Quick positive suction action (0.5 sec).
  • Handles individually height adjustable. Important for users of different heights and for laying steps.
  • Two short handles (in lower position) make easier the taking-off from high stacks of slabs.
  • Special suction plate exchangeable for special elements with maximum weight of 200 kg.
  • The handles can be folded down for easy transportation (see picture).
  • Light weight design – only approx. 18 kg dead weight.
  • Galvanised.

SPEEDY VS-XL

  • with long handles for safe installation of slabs
  • with lifting eye and safety chain for risk-free lifting and handling

NEW: Quick Change device with integral suction plate VS-SWV-SPS-50-30/25

  • The SWV Quick Change device is simply screwed onto the SPEEDY VS-140/200 in place of the standard suction plate. This allows elements up to 50 kg weight to be lifted and laid. The former VS-SPS-50-30/25 suction plate then becomes superfluous as it is now integrated.
  • The SWV Quick Change device allows all new standard suction plates to be mounted in seconds without using tools via 2 quick-change locks.
  • The SWV can also be retro-mounted on the earlier SPEEDY-VS-140; existing suction plates must then be retro-fitted with 2 screw-fitted hooks.
  • The SWV can also be moved through 90 degrees before being screwed onto the SPEEDY; thus allowing the standard suction plates to be used in any preferred alignment.

SPEEDY POWER-RACK VS-PR

** Available from spring 2018

Holder for practical storing of the EU 20i Honda generator when operating the SPEEDY on lifting equipment (e.g. a digger).

  • No cumbersome cable to consider.
  • VS-PR is simply hung on the carrying device with adjusted generator. The VS-EH* lifting eye of the SPEEDY is thenhung on the eye hook of the VS-PR.
  • In the case of a carrying device with a large lifting height, the eye hook may be connected to the VS-EH* lifting eye with the 2 m long loop supplied. Thus, first the SPEEDY then the VS-PR can be switched off.
  • Incl. 3 m extension cable + Velcro strap.
Categories: , , ,

Product description

Basic Devices

VS-140/200 [52700011]:

  • Power: electrically 230 Volt, single phase 50 Hz
  • Working LoadLimit WLL kg (Ibs): depending on size of suction plate
  • Dead Weight kg (Ibs): 18 (40)
  • Description: without suction plate, with standard handle

VS-140/200-XL [52700012]:

  • Power: electrically 230 Volt, single phase 50 Hz
  • Working LoadLimit WLL kg (Ibs): depending on size of suction plate
  • Dead Weight kg (Ibs): 23 (51)
  • Description: without suction plate, with long handlelifting eye, safety chain

VS-140/200-110 [52700013]:

  • Power: electrically 110 Volt, single phase 50/60 Hz
  • Working LoadLimit WLL kg (Ibs): depending on size of suction plate
  • Dead Weight kg (Ibs): 18 (40)
  • Description: without suction plate, with standard handle

VS-140/200-XL-110 [52700014]:

  • Power: electrically 110 Volt, single phase 50/60 Hz
  • Working LoadLimit WLL kg (Ibs): depending on size of suction plate
  • Dead Weight kg (Ibs): 23 (51)
  • Description: without suction plate, with long handlelifting eye, safety chain

SPEEDY POWER-RACK VS-PR

VS-PR [42710149]:

  • Working LoadLimit WLL kg (Ibs):  200 (440)
  • Dead Weight kg (Ibs): 10 (20)

VS-200-EH:

  • Lifting eye with safety chain
  • Dead Weight kg (Ibs): 2 (4)

VS-140-XL-HG:

  • Pair of long handles for slabs up to 1,2 m width
  • Dead Weight kg (Ibs): 8 (18)

Suction plates with counter holder for Quick Change device

VS-SWV-SPS-50-30/25 [42710126]:

  • Suction Plate Dimension mm (in): 300 x 250 (11¾ x 9¾“)
  • Working Load Limit WLL* kg (Ibs): 50 (110)
  • Dead Weight kg (Ibs): 2.0 (4)

 VS-GH-SPS-80-40/30 [42710129]:

  • Suction Plate Dimension mm (in): oval 400 x 300 (15¾ x 11¾“)
  • Working Load Limit WLL* kg (Ibs): 80 (175)
  • Dead Weight kg (Ibs): 2.0 (4)

VS-GH-SPS-100-50/30 [42710130]:

  • Suction Plate Dimension mm (in): oval 500 x 300 (19¾ x 11¾“)
  • Working Load Limit WLL* kg (Ibs): 100 (220)
  • Dead Weight kg (Ibs): 2.5 (6)

VS-GH-SPS-140-70/30 [42710131]:

  • Suction Plate Dimension mm (in): oval 700 x 300 (27½ x 11¾“)
  • Working Load Limit WLL* kg (Ibs): 140 (310)
  • Dead Weight kg (Ibs): 3.0 (7)

VS-GH-SPS-200-85/34 [42710132]:

  • Suction Plate Dimension mm (in): oval 850 x 340 (33½ x 13½“)
  • Working Load Limit WLL* kg (Ibs): 200 (440)
  • Dead Weight kg (Ibs): 11.5 (25)

VS-GH-SPS [42710127]:

  • Retro fit kit counter holder for existing suction plate consisting of:
    2 x counter holder + screws, nuts

Lamellar plugs [21070141]:

  • 1 item; for plugging drilled holes in the suction plates

Suction plates without counter holder for Quick Change device
(If SPEEDY VS is used without the quick-change device)

VS-SPS-50-30/25 [42710013]:

  • Suction Plate Dimension mm (in): oval 300 x 250 (11¾ x 9¾“)
  • Working Load Limit WLL* kg (Ibs): 50 (110)
  • Dead Weight kg (Ibs): 1.4 (3)

VS-SPS-80-40/30 [42710135]:

  • Suction Plate Dimension mm (in): oval 400 x 300 (15¾ x 11¾“)
  • Working Load Limit WLL* kg (Ibs): 80 (175)
  • Dead Weight kg (Ibs): 2.0 (4)

VS-SPS-100-50/30 [42710136]:

  • Suction Plate Dimension mm (in): oval 500 x 300 (19¾ x 11¾“)
  • Working Load Limit WLL* kg (Ibs): 100 (220)
  • Dead Weight kg (Ibs): 2.5 (6)

VS-SPS-140-70/30 [42710137]:

  • Suction Plate Dimension mm (in): oval 700 x 300 (27½ x 11¾“)
  • Working Load Limit WLL* kg (Ibs): 140 (310)
  • Dead Weight kg (Ibs): 3.0 (7)

VS-SPS-200-85/34 [42710133]:

  • Suction Plate Dimension mm (in): oval 850 x 340 (33½ x 13½“)
  • Working Load Limit WLL* kg (Ibs): 200 (440)
  • Dead Weight kg (Ibs): 11.5 (25)

Suction plates with counter holder for kerb stones

VS-GH-WSP-150-90/12-15,5-101° [42720347]:

  • Suction Plate Dimension mm (in): 900 x 120 – 155 / 35″ x 5″ – 6″
  • Working Load Limit WLL* kg (Ibs): 150 (330)
  • Dead Weight kg (Ibs): 6.5 (15)

VS-GH-WSP-150-70/15,5-17-90° [42720360]:

  • Suction Plate Dimension mm (in): 700 x 155 – 170 / 28″ x 6″ – 7″
  • Working Load Limit WLL* kg (Ibs): 150 (330)
  • Dead Weight kg (Ibs): 6.2 (15)

VS-GH-WSP-85-90/8-12-90° [42720345]:

  • Suction Plate Dimension mm (in): 900 x 80 – 120 / 35″ x 3″ – 5″
  • Working Load Limit WLL* kg (Ibs): 85 (185)
  • Dead Weight kg (Ibs): 6.5 (15)

Retrofit Parts for SPEEDY VS:

VS-EH [42710143] :

  • lifting eye with safety chain for VS-140 and VS-140/200
  • Dead Weight kg (Ibs): 2 (4)

VS-140-XL-HG [42710089]:

  • pair of long handles for VS-140 for slabs up to 1,2 m width
  • Dead Weight kg (Ibs): 8 (18)

Reviews

There are no reviews yet.

Be the first to review “SPEEDY VS-140/200 Vacuum Hand Laying Device”

12 + eight =

Related products