Telescopic Screeding System TAS-UNI
Order-Number: 51000042, 51000043
Universally suitable for precise and flexible screeding of laying courses on both, large and small sites.
Comfortable upright working position.
- Consisting of the following components:Telescopic aluminium screeding profiles, height adjustable roller units on either side, pulling elements.
- The aluminium profile has been optimized. So the device does neither move upwards when pulled by hand nor when pulled with chains mechanically. In one run a clean and exact screed can be produced.
- The profile was increased in order to be able to move more material when the predistribution of the screeding material is very rough.
- Step above the roller unit on which the operator can stand to increase the pressure to the ground when using the TAS-M mechanically.
Product description
- Working width up to 6,000 mm (20 feet) by duplicating the profile. (on request).
- Special aluminium profiles, consisting of a low wear, high-tensile alloy are designed to be fully telescopic to one another, stepless.
- With integrated jam system to lock the telescopic parts in any desired position.
- All metall parts are galvanized.
- At each side equipped with height adjustable roller units, including screeding rail cleaning wiper as well as material turn-away metal sheet. Height adjustable directly above scale.
- For mechanical operation 2 pulling chains are included in the standard equipment.
TAS-UNI-450:
- recommended basic configuration:
– 1 Aluminium-Profile each of 750, 1,000, 1,750, 2,000 mm long (30”, 40”, 69”, 80”)
– with integrated clamping adjustment
– 1 set=2 side positioned, height-adjustable roller Units with metal steps and sheet-metal wipers
with integrated fastener for the required segments with hook-in-System for shovel
– 2 pulling chains, incl. hooks - Working Width mm (in): 750 – 4,500 (29½” – 177”)
- Dead Weight kg (lbs): 78 (170)
TAS-UNI-600:
- Standard configuration as above, plus 1 Alu-Profile 3,000 mm long
- Working Width mm (in): 750 – 6,000 (29½” – 236”)
- Dead Weight kg (lbs): 100 (220)
Particularly handy:
- For hand operation the TAS can be easily pulled by means of standard shovels while standing in comfortable upright position!
Adjustable Adapter for Roof-/Pan Profile TAS-UNI-DP:
With this adjustable adapter any roof or pan profile of +/- 4% can can be screeded. The adapter can be adjusted exactly and directly above scale.
Reviews
There are no reviews yet.